https://www.phoenixcontact.com/us/products/2864273 Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UINC-2864273 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR temperature transducer for Pt100 temperature sensors, configured via DIP switch, with screw connection, not pre-configured Product Description The narrow 6.2mm MINI MCR-SL-PT100-UI... is a configurable, 3-way isolated temperature transducer. It is suitable for connecting Pt 100 resistance temperature detectors in accordance with IEC 60751 in 2-, 3-, and 4-conductor connection technology. Electrically isolated 0...20mA, 4...20mA, 0...10V, 0...5V, 1...5V, 10...0V, 20...0mA or 20...4mA standard analog signals are available on the output side. The DIP switches, which can be accessed on the side of the housing, are used to configure the following parameters: -Connection technology -Temperature range to be measured -Output signal -Type of error evaluation Power (19.2VDC to 30VDC) can either be supplied via the connection terminal blocks of the modules or in conjunction with the DIN rail connector. Your advantages Power supply possible via the foot element (TBUS) For 2-, 3-, 4-conductor Pt 100 sensors in accordance with IEC 60751 Error indication via diagnostic LED and analog signal Input and output signals can be configured via DIP switches Highly-compact temperature transducer for electrical isolation, conversion, amplification, and filtering of 3-way isolation Pt 100 signals to create standard signals Temperature measuring range of -150C to +850C Key Commercial Data Packing unit 1 pc GTIN 12/15/2020Page1/8 https://www.phoenixcontact.com/us/products/2864273 Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UINC-2864273 GTIN 4017918956561 Weight per Piece (excluding packing) 85.000 g Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 93.1 mm Depth 101.2 mm Ambient conditions Ambient temperature (operation) -20 C ... 65 C Ambient temperature (storage/transport) -40 C ... 85 C Degree of protection IP20 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Input data Configurable/programmable Yes Sensor types (RTD) that can be used Pt 100 (IEC 60751/EN 60751) Sensor input current 1 mA (constant) Connection technology 2-, 3-, 4-conductor Output data Number of outputs 1 Configurable/programmable Yes, unconfigured Voltage output signal 0 V ... 10 V 10 V ... 0 V 0 V ... 5 V 1 V ... 5 V Current output signal 0 mA ... 20 mA 4 mA ... 20 mA 20 mA ... 0 mA 20 mA ... 4 mA Max. output voltage approx. 12.5 V Max. output current 23 mA 12/15/2020Page2/8 https://www.phoenixcontact.com/us/products/2864273 Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UINC-2864273 Technical data Output data Short-circuit current approx. 10 mA Load/output load voltage output 10 k Load/output load current output < 500 (at 20 mA) Ripple < 20 mVPP (at 10 k) < 20 mVPP (at 500 ) Power supply Nominal supply voltage 24 VDC Supply voltage range 19.2 VDC ... 30 VDC (The DIN rail bus connector (ME 6,2 TBUS-2 1,5/5-ST-3,81 GN, Order No. 2869728) can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN60715)) Max. current consumption < 21 mA (at 24 V DC) Power consumption < 500 mW Connection data Connection method Screw connection Stripping length 12 mm Screw thread M3 Conductor cross section solid 0.2 mm ... 2.5 mm Conductor cross section flexible 0.2 mm ... 2.5 mm Conductor cross section AWG 26 ... 12 General No. of channels 1 Transmission error in the set measuring range ((100 K / set measurement range [K]) + 0.1)% Transmission error in the full measuring range 0,2 % Maximum temperature coefficient < 0.02 %/K Protective circuit Transient protection Electrical isolation Basic insulation according to EN 61010 Overvoltage category II Degree of pollution 2 Rated insulation voltage 50 V AC/DC Test voltage, input/output/supply 1.5 kV (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Noise immunity EN 61000-6-2 When being exposed to interference, there may be minimal deviations. Color green 12/15/2020Page3/8 https://www.phoenixcontact.com/us/products/2864273 Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UINC-2864273 Technical data General Housing material PBT Mounting position any Assembly instructions The T connector can be used to bridge the supply voltage. It can be snapped onto a 35 mm DIN rail according to EN 60715. Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 2 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 2 EMC data Designation Electromagnetic RF field Standards/regulations EN61000-4-3 Typical deviation from the measuring range final value 10 % Designation Fast transients (burst) Standards/regulations EN61000-4-4 Typical deviation from the measuring range final value 10 % Designation Conducted interferences Standards/regulations EN61000-4-6 Typical deviation from the measuring range final value 10 % Standards and Regulations Electromagnetic compatibility Conformance with EMC directive Noise emission EN 61000-6-4 Connection in acc. with standard CUL Standards/regulations EN 61000-4-2 Designation Electromagnetic RF field Standards/regulations EN61000-4-3 EN61000-4-4 EN61000-4-5 Designation Conducted interferences Standards/regulations EN61000-4-6 Electrical isolation Basic insulation according to EN 61010 Conformance CE-compliant ATEX II 3 G Ex nA IIC T4 Gc X UL, USA/Canada UL 508 Recognized Class I, Div. 2, Groups A, B, C, D T5 GL GL EMC 2 D Conformance/approvals 12/15/2020Page4/8 https://www.phoenixcontact.com/us/products/2864273 Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UINC-2864273 Technical data Conformance/approvals Designation CE Identification CE-compliant Designation UL, USA/Canada Identification UL508 Recognized Class I, Div. 2, Groups A, B, C, D T5 Designation Shipbuilding approval Certificate DNV GL TAA00002R0 Temperature B Humidity B Vibration B EMC A Enclosure Required protection according to the Rules shall be provided upon installation on board Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 years For details about hazardous substances go to tab "Downloads", Category "Manufacturer's declaration" Drawings Block diagram Dimensional drawing 93,1 OUT IN Sensor / Field 6,2 PLC / DCS PT 100 1 1 OUT U,I 5 + 5 active 2 GND 1 passive 6 - 6 3 3 4 +24V 4 7 + GND 2 102,5 2 8 - +24V GND 2 Zone 2 Div. 2 Classifications eCl@ss eCl@ss 10.0.1 27210129 12/15/2020Page5/8 https://www.phoenixcontact.com/us/products/2864273 Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UINC-2864273 Classifications eCl@ss eCl@ss 11.0 27210129 eCl@ss 4.0 27200200 eCl@ss 4.1 27200200 eCl@ss 5.0 27200200 eCl@ss 5.1 27200200 eCl@ss 6.0 27200200 eCl@ss 7.0 27200206 eCl@ss 8.0 27200206 eCl@ss 9.0 27210129 ETIM ETIM 2.0 EC001446 ETIM 3.0 EC001446 ETIM 4.0 EC001446 ETIM 5.0 EC001446 ETIM 6.0 EC002919 ETIM 7.0 EC002919 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 41112105 UNSPSC 18.0 41112105 UNSPSC 19.0 41112105 UNSPSC 20.0 41112105 UNSPSC 21.0 41112105 Approvals Approvals Approvals UL Recognized / cUL Recognized / DNV GL / cULus Recognized 12/15/2020Page6/8 https://www.phoenixcontact.com/us/products/2864273 Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UINC-2864273 Approvals Ex Approvals ATEX / UL Listed / cUL Listed / EAC Ex / cULus Listed Approval details UL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 cUL Recognized http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm FILE E 238705 DNV GL https://approvalfinder.dnvgl.com/ TAA00002R0 cULus Recognized Accessories Accessories DIN rail connector DIN rail bus connectors-ME 6,2 TBUS-2 1,5/5-ST-3,81 GN-2869728 DIN rail connector for DIN rail mounting. Universal for TBUS housing. Gold-plated contacts, 5-pos. Marking material 12/15/2020Page7/8 https://www.phoenixcontact.com/us/products/2864273 Resistance thermometer measuring transducer-MINI MCR-SL-PT100-UINC-2864273 Accessories Transparent cover-MINI MCR DKL-2308111 Fold up transparent cover for MINI MCR modules with additional labeling option using insert strips and flat Zack marker strip 6.2 mm Marking label-MINI MCR-DKL-LABEL-2810272 Label for extended marking of MINI MCR modules in connection with the MINI MCR-DKL Power module Power terminal block-MINI MCR-SL-PTB-2864134 MCR power terminal block for supplying several MINI Analog modules via the DIN rail connector, with screw connection, maximum current consumption of up to 2A Power supply Power supply unit-MINI-SYS-PS-100-240AC/24DC/1.5-2866983 Primary-switched MINI POWER supply for DIN rail mounting, input: 1-phase, output: 24 V DC/1.5 A Phoenix Contact 2020 (c) - all rights reserved http://www.phoenixcontact.com 12/15/2020Page8/8